Photo Source: rekcad2018.org
If your bathroom sink is clogged and you can’t seem to remove the stopper, don’t worry — you’re not alone. This is a common problem that many people face, but it can be easily fixed with little know-how. In this guide, we’ll walk you through the process of removing the sink stopper so that you can clear the drain and get your sink flowing again. Let’s get started!
What Is A Bathroom Sink Stopper?
Photo Source: yourproplumber.com
Bathroom sink stoppers are designed to close off the drain so that water cannot escape. They come in a variety of materials, including plastic, rubber, and metal. Some stoppers are made to be removable, while others are not.
There are two main types of bathroom sink stoppers: push-pull and lift-and-turn. Push-pull stoppers have a knob or Lever on the top that is used to push the stopped down into the drain. Lift-and-turn stoppers have a knob or handle on the side that is used to lift the stopper up and turn it to the side so that it can be removed from the drain.
Most bathroom sink drains come with a pop-up stopper. This type of stopper is attached to the drain with a linkage system. The stopper is opened and closed by moving the knob or handle on the top of the drain.
History of Bathroom Sink Stopper
The first bathroom sink stopper was invented in the early 1800s. It was made of metal and had a rubber gasket that fit over the drain. The stopper was held in place by a screw that went through the center of the gasket.
In the late 1800s, the push-pull type of stopper was invented. This type of stopper had a knob on the top that was used to push the stopper down into the drain. The first lift-and-turn stoppers were also invented in the late 1800s. These stoppers had a knob or handle on the side that was used to lift the stopper up and turn it to the side so that it could be removed from the drain.
How To Remove Bathroom Sink Stopper?
Photo Source: plumbertip.com
Things You’ll Need:
- Basin wrench
- Screwdriver
- New stopper (optional)
Instructions:
- Locate the setscrew that secures the stopper rod to the drain body. This is usually located underneath the sink.
- Use a basin wrench to remove the setscrew. If you can’t reach it with the wrench, try using a screwdriver.
- Pull out the stopper rod and remove the stopper from the drain.
- Inspect the drain for any debris or buildup that might be causing problems. Clean it out if necessary.
- If you’re replacing the stopper, follow the manufacturer’s instructions for installation. Otherwise, simply reverse these steps to reinstall the old stopper.
Different Ways To Remove A Bathroom Sink Stopper
Photo Source: nimvo.com
There are a few different ways that you can remove a bathroom sink stopper. Depending on the type of stopper you have, and how it is installed, you may need to use a different method. However, all of the methods outlined below should work for most types of stoppers.
1. Use pliers
If your bathroom sink stopper has a small knob or lever on the top, then you can try using pliers to remove it. Simply grip the knob or lever with the pliers and turn it counter-clockwise. This should loosen the stopper so that you can pull it out by hand.
2. Remove the screws.
Another way to remove a bathroom sink stopper is by removing the screws that hold it in place. Most stoppers are held in place by two screws, one on each side. Use a screwdriver to remove these screws and then pull the stopper out of the drain.
3. Use a plunger
If your sink has an overflow hole, you can try using a plunger to remove the stopper. Cover the overflow hole with the plunger and then push and pull the plunger up and down. This should create enough suction to dislodge the stopper.
4. Use a wire hanger
If you don’t have any tools handy, you can try using a wire hanger to remove the stopper. Straighten out the hanger and then make a small hook at the end. Insert the hook into the drain and try to catch onto the stopper. Once you have a good grip, pull the stopper out of the drain.
5. Use a toilet plunger
If you have a toilet plunger, you can try using that to remove the stopper. The plunger should fit over the drain opening and create enough suction to dislodge the stopper.
6. Use boiling water
Sometimes, all you need is a little bit of hot water to loosen things up. Boil a pot of water and then pour it down the drain. This should help to soften any buildup around the stopper and make it easier to remove.
Conclusion
Removing a bathroom sink stopper is a fairly easy process that can be completed in a few minutes. There are a few different ways to do it, but the most common is by using a pair of pliers. If the stopper is stuck, you may need to use a screwdriver or other tool to loosen it. Once the stopper is loose, you can simply pull it out and dispose of it.
If you have any questions or comments about how to remove bathroom sink stopper, please leave them below!
